A really wonderful soap for the needs of the modern man!
With a very light aroma of essential oils of sandalwood, teat tree & bergamot.
In this soap its main ingredients are Calendula oil Zeolite & silk fibers combined with other emollient vegetable oils, butter & vitamin E.
The nourishing oils and butters will give vitality and radiance to the damaged or non-damaged skin, while the zeolite supports skin regeneration through a long-lasting detoxification.
This special soap deeply cleanses and moisturizes the skin and with its rich and creamy foam gives it a natural and gentle shave, making the blade slide with great ease, achieving a fast, comfortable and safe shave.
How to create rich foam in two ways.
First of all, you need to soak your brush either by holding it under running, hot water (not boiling) or in a container full of hot water. Shake the brush a few times so that the excess water is expelled, soak the soap in the bowl with a small amount of water for a minute or two, drain it, and start rubbing the brush into the soap in a circular motion. When the brush is filled with soap transfer it to a separate, empty container and continue working the foam. Next, it's time to test the foam between your thumb and forefinger. If you feel it sticky you should add a few drops of water and continue mixing. Test it again and continue in this way until you do not feel the foam sticky between the fingers but soft, silky and dense. When you add water, you have to be careful, because if you overdo it you will understand that the foam will become sticky again. Wet your face and put the foam on your face using circular motions.
• Creating foam directly on your face:
The first steps are similar to the method described above. You need to soak your brush in warm water and then shake it to expel the excess water. Wet the soap well with water again to soften it and start rubbing the brush on the soap, as described above. Do not apply any pressure, it is not necessary. When the brush is full of soap it is time to move on to the next level. Wet your face and start creating the foam with circular movements, first on your cheeks. After a few seconds of circular movements on your face, you will have a nice and dense foam. If you accidentally overdo it with water, do not worry, put a little more soap on your brush, rubbing it back on the surface of the soap, and continue to work the foam on your face. If the foam is very sticky and thick, just add a few drops of water to your shaving brush and move on.
Whichever way you choose, make sure your brush is of good quality so that it does not irritate the skin of your face.
Note: all the products you will find in our store are 100% handmade. This means that there may be slight differences in the hue of the products from those shown, but in no case will there be a difference in their quality, composition or properties.
Safe Use: The information that accompanies our products is to inform our customers about the uses and properties of natural materials, oils or essential oils that they contain and are not intended to diagnose, treat, or prevent any disease.
You are responsible for the understanding and safe use of these products.
* The rough form of the soap is completely normal, a result of the hot method by which it is prepared.
* The brush & the jar are for the needs of photography. Not available.
-Net weight during production + -100gr.
-Dimensions: ~ W6.50xH3cm.